IPv6
/128
1
IPv6 /128 prefix
/128 means the first 128 bits are the network and 0 are left for hosts. That is 1 addresses.
Addresses are 128 bits, so nobody writes a mask — only the prefix length. A home gets a /56, a single network a /64.
- Prefix
- /128
- Host bits
- 0
- Addresses
- 1
- Usable hosts
- 1
- /64 networks inside
- None
- Nibble boundary
- Yes
Blocks reserved at this length
Blocks the standards set aside. The addresses themselves are the same everywhere, so they are left as they are.
::/128::1/128
Prefixes either side
How to read this
- /24 means the first 24 bits are the network; the remaining 8 hold the addresses inside it.
- Each extra bit splits the network in two and halves the addresses.
- Usable addresses are normally the total minus two — the network and broadcast addresses.
- IPv6 has no broadcast, so nothing is subtracted. One network is conventionally a /64.
Frequently asked questions
Q. How many addresses are in a /128?
1, of which 1 can actually be handed out.
Q. How is a /128 written?
IPv6 uses no mask — you simply write /128.
Q. How many /64 networks fit in a /128?
None — it is narrower than a /64.
Q. How many host bits are there?
0. Each extra network bit halves the addresses.