Water hardness·125 ppm
hard
125 ppm
7 °dH · 7.3 gpg
12.5 °fH · 8.77 °e · 1.249 mmol/L

125 ppm water hardness — 7 °dH, 7.3 gpg

125 ppm is the same water as 7 °dH in Germany, 12.5 °fH in France, 8.77 °e in England, 7.3 gpg in the United States and 1.249 mmol/L in the lab. On this chart’s scale it counts as hard.

ppm (mg/L CaCO₃)
125 ppm
German degree
7 °dH
French degree
12.5 °fH
English degree (Clark)
8.77 °e
grains per US gallon
7.3 gpg
millimoles per litre
1.249 mmol/L

Where soft ends and hard begins depends on the standard

The conversions are fixed; the grades are a choice. This chart draws its lines at the widely quoted 60, 120 and 180 ppm — meaning they are our approximation. The German detergent law, WRMG, draws its own at 1.5 and 2.5 mmol/L, that is 150.1 and 250.2 ppm, or 8.4 and 14 °dH. A 150 ppm water is therefore "hard" on this chart and "soft" under that law — the water did not change, the ruler did. Near a boundary, do not settle the question here: read the standard your appliance or your country actually uses.

  • Grade on this charthard
  • German WRMG gradesoft
  • Twice as hard250 ppm
  • Half as hard62.5 ppm
  • WRMG8.41 °dH · 14.02 °dH

Nearby cells

hard

Worth knowing

  • ppm (mg/L CaCO₃) is the base, and every other unit is a fixed multiple of it.
  • °dH is ppm ÷ 17.85, gpg is ppm ÷ 17.12, °fH is ppm ÷ 10, °e is ppm ÷ 14.25 and mmol/L is ppm ÷ 100.09.
  • °dH and °fH both read "one degree per 10 mg/L", yet differ 1.78-fold because one counts CaO and the other CaCO₃.
  • Grade boundaries differ between standards — the 60, 120 and 180 ppm on this chart are our chosen approximation.

Frequently asked questions

Q. How many °dH is 125 ppm?

7 °dH — ppm divided by 17.85. The same water reads 12.5 °fH in France, 8.77 °e in England, 7.3 gpg in the United States and 1.249 mmol/L as a molar concentration.

Q. Is 125 ppm soft or hard?

On this chart’s scale it is hard. Under the German WRMG, though, it is soft — that standard draws its lines elsewhere. Close to a boundary, go by whatever standard your appliance uses.

Q. What if the water were twice as hard?

It would be 250 ppm and every one of the six units would double exactly. Conversion is nothing but multiplication, so half of it, 62.5 ppm, halves every figure, and at 0 ppm every unit reads zero.