D22 2m rebar — 6.08 kg per bar
A D22 2m bar weighs 6.08 kg. The 3.04 kg/m comes from the 387.08 mm² cross-section of a 22.2 mm nominal diameter times a density of 7850 kg/m³, so 100 bars are 608 kg and a tonne holds 164 bars.
D13 is a name, 12.7 mm is the diameter
The 13 in D13 is a label; the diameter that goes into the formula is 12.7 mm, inherited from a half inch. Feed the label into the formula and you get 1.042 kg/m, 5 % heavier than the standard value of 0.995 kg/m. The same choice is why a ribbed bar can be treated as a smooth cylinder at all: the standard sets the nominal diameter so that it reproduces the real mass.
- ⌀ 22.2 mm · 387.08 mm²3.04 kg/m
- ⌀ 22 mm2.984 kg/m
- Bar size
- D22
- Length
- 2 m
- Nominal diameter
- 22.2 mm
- Cross-section
- 387.08 mm²
- Weight per metre
- 3.04 kg/m
- Weight per bar
- 6.08 kg
- 100 bars
- 608 kg
- Bars per tonne
- 164
- Lap splice
- 0.888 m · 2.7 kg
- Order weight
- 638.4 kg
Nearby cells
Same size, other lengths
Same length, other sizes
Worth knowing
- Weight per metre (kg/m) is π/4 × nominal diameter² × 7850 ÷ 10⁶ — that is the 0.006165 factor.
- What goes into the formula is the nominal diameter, not the label: D13 means 12.7 mm.
- Total weight is weight per metre × length × count, and doubling the diameter quadruples the weight.
- An order adds lap splices, roughly 40 diameters each, and 3 to 5 % for waste.
Common questions
Q. How much does one D22 2m bar weigh?
6.08 kg — 3.04 kg/m times 2 m. Ten bars come to 60.8 kg and a hundred to 608 kg.
Q. How many bars make a tonne?
164. That is 1000 divided by 6.08 kg, and 100 bars weigh 0.608 t. Ordered with 5 % waste, those 100 become 638.4 kg.
Q. Where does 3.04 kg/m come from?
The 387.08 mm² cross-section of a 22.2 mm nominal diameter, converted to m² and multiplied by a density of 7850 kg/m³. Using the label 22 instead would give 2.984 kg/m, which is wrong.