Home·Frequencies

5000 Hz

Treble (4–20 kHz) · D#8

Turn the volume down before you play. A pure tone is harder on the ears than music at the same level.

200 µs

Standard band

A centre frequency of the standard one-third-octave bands used in noise measurement and speaker work.

Common value

A value that comes up often in searches and tests.

Wavelength6.9 cm
Period200 µs
Nearest noteD#8
Off by+8 cents
AudibleYes
Harmonics10000 Hz · 15000 Hz · 20000 Hz
One octave down2500 Hz
One octave up10000 Hz

How to read this

  • Hertz counts how many times the air vibrates per second. The bigger the number, the higher the pitch.
  • Wavelength is the speed of sound (343 m/s at 20 °C) divided by the frequency. That makes 20 Hz seventeen metres long and 20 kHz under two centimetres.
  • People hear roughly 20 Hz to 20 kHz, but the upper limit drops with age. Past about 15 kHz, some hear the tone and some do not.
  • Hearing nothing does not mean the equipment is broken. Small speakers cannot reach the low notes, and for the high ones it is the ear that gives up first.

Frequently asked questions

Q. What does 5000 Hz sound like?

It is a pure tone vibrating 5000 times a second. It falls inside the range people hear, and the nearest musical note is D#8.

Q. What is the wavelength of 5000 Hz?

6.9 cm in air. Sound travels 343 metres per second through 20 °C air, so the wavelength is that distance divided by 5000.

Q. What note is 5000 Hz?

The nearest note is D#8, and it is 8 cents sharp. A semitone is 100 cents, so that is about 8% of a semitone away.

Q. I cannot hear 5000 Hz — is something wrong?

This band is comfortable for most equipment and most ears, so check the volume and the output device first.

Q. What are the harmonics of 5000 Hz?

The whole-number multiples: 10000 Hz, 15000 Hz, 20000 Hz. An octave up is double, 10000 Hz; an octave down is half, 2500 Hz.

Nearby frequencies

Frequency doubles for every octave, so closeness is measured in ratios, not differences.