Round bar ⌀ 13 in steel — 6.25 kg a piece
Round bar ⌀ 13 weighs 6.25 kg. Its 132.73 mm² section times a density of 7850 kg/m³ gives 1.042 kg/m, so 100 pieces come to 625.17 kg and a tonne holds 159.
Only the section formula changes with shape
Plate and flat bar are thickness × width, square bar is side², round bar is π/4 × diameter². Tubes are the outside section minus the inside one: π/4 × (outside² − inside²) for round tube, outside² − inside² for box section, where the inside size is the outside less the wall on both faces, outside − 2t. Subtract the wall only once and you get a tube with half the wall and roughly half the weight — that factor of two is the single most common slip in this calculation.
- π/4 × d²132.73 mm²
- 132.73 mm² ÷ 10⁶ × 7850 kg/m³1.042 kg/m
- Size
- ⌀ 13 mm
- Section formula
- π/4 × d²
- Cross-section
- 132.73 mm²
- Weight per metre
- 1.042 kg/m
- Length of one
- 6 m
- Weight of one
- 6.25 kg
- 100 pieces
- 625.17 kg
- Pieces per tonne
- 159
Nearby cells
Same shape, other sizes
Worth knowing
- Weight per metre (kg/m) is section in mm² ÷ 10⁶ × 7850 — only the section formula changes with shape.
- For plate, thickness × 7.85 is the weight per m²: 47.1 kg/m² at 6 mm, twice that at 12 mm.
- For tube, subtract the inside section from the outside one; the inside size is the outside less 2t.
- Doubling a dimension quadruples the section, while length is directly proportional to weight.
Common questions
Q. How much does one Round bar ⌀ 13 weigh?
6.25 kg — 1.042 kg/m times its length. Ten pieces come to 62.52 kg and a hundred to 625.17 kg.
Q. How many pieces make a tonne?
159. That is 1000 divided by 6.25 kg, and 100 pieces weigh 0.625 t.
Q. Where does 1.042 kg/m come from?
The section is π/4 × d², which gives 132.73 mm²; convert that to m² and multiply by a density of 7850 kg/m³. With the dimensions in hand you get the same number without any table.