Square bar 12 × 12 in steel — 6.78 kg a piece
Square bar 12 × 12 weighs 6.78 kg. Its 144 mm² section times a density of 7850 kg/m³ gives 1.13 kg/m, so 100 pieces come to 678.24 kg and a tonne holds 147.
Only the section formula changes with shape
Plate and flat bar are thickness × width, square bar is side², round bar is π/4 × diameter². Tubes are the outside section minus the inside one: π/4 × (outside² − inside²) for round tube, outside² − inside² for box section, where the inside size is the outside less the wall on both faces, outside − 2t. Subtract the wall only once and you get a tube with half the wall and roughly half the weight — that factor of two is the single most common slip in this calculation.
- a²144 mm²
- 144 mm² ÷ 10⁶ × 7850 kg/m³1.13 kg/m
- Size
- 12 × 12 mm
- Section formula
- a²
- Cross-section
- 144 mm²
- Weight per metre
- 1.13 kg/m
- Length of one
- 6 m
- Weight of one
- 6.78 kg
- 100 pieces
- 678.24 kg
- Pieces per tonne
- 147
Nearby cells
Same shape, other sizes
Worth knowing
- Weight per metre (kg/m) is section in mm² ÷ 10⁶ × 7850 — only the section formula changes with shape.
- For plate, thickness × 7.85 is the weight per m²: 47.1 kg/m² at 6 mm, twice that at 12 mm.
- For tube, subtract the inside section from the outside one; the inside size is the outside less 2t.
- Doubling a dimension quadruples the section, while length is directly proportional to weight.
Common questions
Q. How much does one Square bar 12 × 12 weigh?
6.78 kg — 1.13 kg/m times its length. Ten pieces come to 67.82 kg and a hundred to 678.24 kg.
Q. How many pieces make a tonne?
147. That is 1000 divided by 6.78 kg, and 100 pieces weigh 0.678 t.
Q. Where does 1.13 kg/m come from?
The section is a², which gives 144 mm²; convert that to m² and multiply by a density of 7850 kg/m³. With the dimensions in hand you get the same number without any table.