cellulose · 120mm
R 2.86
U 0.33 W/m²·K
cellulose, 120 mm — R 2.86
120 mm divided by a conductivity of 0.042 gives an R-value of 2.86. The U-value is 0.33, so a square metre leaks 6.61 W across a 20-degree difference.
Standards it meets
Not up to any of them yet
- Material
- cellulose
- Thickness
- 120 mm
- Thermal conductivity
- 0.042 W/m·K
- Thermal resistance
- 2.86 m²·K/W
- U-value
- 0.33 W/m²·K
- Heat lost per square metre
- 6.61 W
- As concrete
- 4.57 m
Thickness for the same performance
This is the number that shows what insulation is worth. Matching 100 mm of XPS with concrete alone would take 5.7 metres of it. No one builds a wall like that — which is why a concrete building only gets warm once a thin layer of insulation is added.
- vacuum panel20 mm
- phenolic foam57 mm
- rigid polyurethane66 mm
- extruded polystyrene80 mm
- graphite EPS89 mm
- white EPS103 mm
- glass wool106 mm
- mineral wool114 mm
- timber371 mm
- plasterboard514 mm
- concrete4571 mm
Nearby cells
Same material, other thicknesses
Same thickness, other materials
How to read this
- Thermal resistance is the thickness in metres divided by the conductivity. Bigger is better.
- The U-value adds 0.17 of surface resistance and then flips the total. Smaller is better.
- Resistances add across layers, so a whole wall is the sum of its parts.
- Conductivity varies by product; the values here are typical for the material.
Frequently asked questions
Q. What is the R-value of 120 mm of cellulose?
2.86 — 120 mm in metres divided by a conductivity of 0.042.
Q. And the U-value?
0.33. That is 3.03 — the resistance plus 0.17 of surface — turned upside down, and a square metre leaks 6.61 W across 20 degrees.
Q. How much concrete would match it?
4.57 metres.
Q. Which standards does it meet?
At 0.33 it does not clear any of them yet.