Plate 4 × 1219 × 2438 in steel — 93.32 kg a piece
Plate 4 × 1219 × 2438 weighs 93.32 kg. Its 4876 mm² section times a density of 7850 kg/m³ gives 38.277 kg/m, so 100 pieces come to 9331.84 kg and a tonne holds 10.
Only the section formula changes with shape
Plate and flat bar are thickness × width, square bar is side², round bar is π/4 × diameter². Tubes are the outside section minus the inside one: π/4 × (outside² − inside²) for round tube, outside² − inside² for box section, where the inside size is the outside less the wall on both faces, outside − 2t. Subtract the wall only once and you get a tube with half the wall and roughly half the weight — that factor of two is the single most common slip in this calculation.
- t × w4876 mm²
- 4876 mm² ÷ 10⁶ × 7850 kg/m³38.277 kg/m
- Size
- 4 × 1219 × 2438 mm
- Section formula
- t × w
- Cross-section
- 4876 mm²
- Weight per metre
- 38.277 kg/m
- Weight per m²
- 31.4 kg/m²
- Length of one
- 2.438 m
- Area of one sheet
- 2.972 m²
- Weight of one
- 93.32 kg
- 100 pieces
- 9331.84 kg
- Pieces per tonne
- 10
Nearby cells
Same shape, other sizes
Worth knowing
- Weight per metre (kg/m) is section in mm² ÷ 10⁶ × 7850 — only the section formula changes with shape.
- For plate, thickness × 7.85 is the weight per m²: 47.1 kg/m² at 6 mm, twice that at 12 mm.
- For tube, subtract the inside section from the outside one; the inside size is the outside less 2t.
- Doubling a dimension quadruples the section, while length is directly proportional to weight.
Common questions
Q. How much does one Plate 4 × 1219 × 2438 weigh?
93.32 kg — 38.277 kg/m times its length. Ten pieces come to 933.18 kg and a hundred to 9331.84 kg.
Q. How many pieces make a tonne?
10. That is 1000 divided by 93.32 kg, and 100 pieces weigh 9.332 t.
Q. Where does 38.277 kg/m come from?
The section is t × w, which gives 4876 mm²; convert that to m² and multiply by a density of 7850 kg/m³. With the dimensions in hand you get the same number without any table.