Plate 6 × 1000 × 2000 in steel — 94.2 kg a piece
Plate 6 × 1000 × 2000 weighs 94.2 kg. Its 6000 mm² section times a density of 7850 kg/m³ gives 47.1 kg/m, so 100 pieces come to 9420 kg and a tonne holds 10.
Only the section formula changes with shape
Plate and flat bar are thickness × width, square bar is side², round bar is π/4 × diameter². Tubes are the outside section minus the inside one: π/4 × (outside² − inside²) for round tube, outside² − inside² for box section, where the inside size is the outside less the wall on both faces, outside − 2t. Subtract the wall only once and you get a tube with half the wall and roughly half the weight — that factor of two is the single most common slip in this calculation.
- t × w6000 mm²
- 6000 mm² ÷ 10⁶ × 7850 kg/m³47.1 kg/m
- Size
- 6 × 1000 × 2000 mm
- Section formula
- t × w
- Cross-section
- 6000 mm²
- Weight per metre
- 47.1 kg/m
- Weight per m²
- 47.1 kg/m²
- Length of one
- 2 m
- Area of one sheet
- 2 m²
- Weight of one
- 94.2 kg
- 100 pieces
- 9420 kg
- Pieces per tonne
- 10
Nearby cells
Same shape, other sizes
Worth knowing
- Weight per metre (kg/m) is section in mm² ÷ 10⁶ × 7850 — only the section formula changes with shape.
- For plate, thickness × 7.85 is the weight per m²: 47.1 kg/m² at 6 mm, twice that at 12 mm.
- For tube, subtract the inside section from the outside one; the inside size is the outside less 2t.
- Doubling a dimension quadruples the section, while length is directly proportional to weight.
Common questions
Q. How much does one Plate 6 × 1000 × 2000 weigh?
94.2 kg — 47.1 kg/m times its length. Ten pieces come to 942 kg and a hundred to 9420 kg.
Q. How many pieces make a tonne?
10. That is 1000 divided by 94.2 kg, and 100 pieces weigh 9.42 t.
Q. Where does 47.1 kg/m come from?
The section is t × w, which gives 6000 mm²; convert that to m² and multiply by a density of 7850 kg/m³. With the dimensions in hand you get the same number without any table.